Proteomic analysis of heat and cold stress response of Rhodobacter capsulatus and evolutionary engineering of its heat resistant mutants
Fen Bilimleri Enstitüsü, İstanbul Teknik Üniversitesi, 2011
ABDULMECİT GÖKÇE
|
Stress State of Pretensioned Structures
Journal of Testing and Evaluation, Vol. 48, No. 5, Eylül 2018, s. 3768-3778, ISSN: 0090-3973
ABDULALİYEV Z.İYA,ATAOĞLU ŞENOL,DÖNMEZ AHMET ABDULLAH
|
Stress analysis of a complete maxillary denture under various drop impact conditions a 3D finite element study
Computer Methods in Biomechanics and Biomedical Engineering, Vol. 18, No. 14, Haziran 2015, s. 1543-1554, ISSN: 1025-5842
SÜNBÜLOĞLU EMİN
|
Static Analysis of the Stress State Caused by Heating Quenching Process in Tempered Glasses
Journal of Trends in the Development of Machineryand Associated Technology, Vol. 21, No. 1, Eylül 2018, s. 121-124, ISSN: 2303-4009
DUMAN CUMA UMUR,SÖNMEZ MEHMET ŞEREF,BAYTAK TUĞBA,BULUT OSMAN
|
Thermal stress analysis around a cavity on a bimetal
STRUCTURAL ENGINEERING AND MECHANICS, Vol. 69, No. 1, Ocak 2019, s. 69-75, ISSN: 1225-4568
BAYTAK TUĞBA,BULUT OSMAN
|
Stress Analysis and Microstructure of the Al2O3/Cu/MgB2 wires
Journal of Trends in the Development of Machinery and Associated Technology, Vol. 20, No. 1, Ekim 2016, s. 57-60, ISSN: 2303-4009
ATAOĞLU ŞENOL,TOSUN MURAT,BAYTAK TUĞBA,DÖNMEZ ABDULLAH,BULUT OSMAN,İPEK CENGİZ
|
Preparation and Thermal Stress Analysis of Al_{2}O_{3} Insulation Coatings on SS-304 Tape
IEEE Transactions on Applied Superconductivity, Vol. 19, No. 3, Haziran 2009, s. 2375-2378, ISSN: 1051-8223
ATAOĞLU ŞENOL,ARDA LÜTFİ,KADIOĞLU NECLA,ÇAKIROĞLU ÖMER,BULUT OSMAN,GÜLLÜOĞLU ARİF NİHAT,BELENLİ İBRAHİM
|
THE ANALYSIS OF A THERMAL STRESS STATE FOR INDUSTRIALCOMPOSITE PLATES
Journal of Trends in the Development of Machineryand Associated Technology, Vol. 21, No. 1, Eylül 2018, s. 113-116, ISSN: 2303-4009
BAYTAK TUĞBA,BULUT OSMAN
|
Numerical Static and Dynamic Stress Analysis on Railway Passenger and Freight Car Models
International Iron and Steel Symposium, 1 Ocak 2010
C BAYKASOGLU, E SUNBULOGLU, SE BOZDAG, F ARUK, T TOPRAKİ A MUGAN
|
Influence of different luting cement on the stress distribution in maxillary central incisor restored by composite laminate veneer A 3D finite element analysis
6th CONSEURO 2013 Paris Conference, 1 Ocak 2013
MM EREN, T YUCEL, E YILDIZ, E ICER, C BAYKASOGLU, A MUGAN
|
Torsional rigidity of arbitrarily shaped composite sections by hybrid finite element approach
STEEL AND COMPOSITE STRUCTURES, Vol. 7, No. 3, 2007, s. 241-251, ISSN: 1229-9367
DARLLMAZ KUTLU,ORAKDÖĞEN ENGİN,GİRGİN KONURALP,KÜÇÜKARSLAN SEMİH
|
A simplified solution of the torsional rigidity of the composite beams by using FEM
ADVANCES IN STRUCTURAL ENGINEERING, Vol. 10, No. 5, 2007, s. 467-473, ISSN: 1369-4332
SAYGUN A.,OMURTAG MEHMET HAKKI,ORAKDÖĞEN ENGİN,GİRGİN KONURALP,KÜÇÜKARSLAN SEMİH
|
Genomic and transcriptomic analysis of a coniferyl aldehyde-resistant Saccharomyces cerevisiae strain obtained by evolutionary engineering
FEMS YEAST RESEARCH, Vol. 19, No. 3, Mayıs 2019, ISSN: 1567-1356
HACISALİHOĞLU BURCU,HOLYAVKİN CAN,TOPALOĞLU ALİCAN,KISAKESEN HALİL İBRAHİM,ÇAKAR ZEYNEP PETEK
|
Analysis of wall shear stress on the outside in type hollow fiber membrane modules by CFD simulation
Desalination, Vol. 351, Ekim 2014, s. 109-119, ISSN: 00119164
KAYA RECEP,DEVECI GOKHAN,TÜRKEN TÜRKER,ŞENGÜR TAŞDEMİR REYHAN,GÜÇLÜ SERKAN,İMER DERYA YÜKSEL,KOYUNCU İSMAİL
|
Stress analysis of a Wankel engine eccentric shaft under varied thermal conditions
Materials Testing, Vol. 61, No. 12, Aralık 2019, s. 1157-1164, ISSN: 0025-5300
CİHAN ÖMER,BULUT MEHMET,KUTLAR OSMAN AKIN
|
STRESS ANALYSIS AND MICROSTRUCTURE OF THE AL2O3/Cu/MgB2 WIRES
20th International Research/Expert Conference”Trends in the Development of Machinery and Associated Technology” TMT2016, 24 Eylül 2016
ATAOĞLU ŞENOL,TOSUN MURAT,BAYTAK TUĞBA,DÖNMEZ ABDULLAH,BULUT OSMAN,İPEK CENGİZ
|
The Analysis Of A Thermal Stress State For Industrial Composite Plates
21 st International Research/Expert Conference ”Trends in the Development of Machinery and Associated Technology” TMT2018, 18 Eylül 2018
BAYTAK TUĞBA,BULUT OSMAN
|
Stress analysis of twisted MgB2 cable
4th Internatıonal conference on materials science and nanotechnology for next generation (MSNG2017), 28 Haziran 2017
TOSUN MURAT,İPEK CENGİZ,DÖNMEZ ABDULLAH,BULUT OSMAN,BAYTAK TUĞBA,ATAOĞLU ŞENOL,ARDA LÜTFİ
|
Evaluation of the Plio-Quaternary tectonic stress regime from fault kinematic analysis in the lake Van Basin (Eastern Anatolia)
Journal of Structural Geology, Vol. 140, Ocak 2020, ISSN: 0191-8141
SAĞLAM SELÇUK AZAD, ERTURAÇ MEHMET KORHAN, SUNAL GÜRSEL, ÇAKIR ZİYADİN
|
Static Analysis of the Stress State Caused by Heating Quenching Process in Tempered Glasses
Journal of Trends in the Development of Machineryand Associated Technology, Vol. 21, No. 1, Eylül 2018, s. 121-124, ISSN: 2303-4009
DUMAN CUMA UMUR,SÖNMEZ MEHMET ŞEREF,BAYTAK TUĞBA,BULUT OSMAN
|